tutorialqueen.com

Hello guys I will show how create a 3dsmax 3d melamine_ashtray model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Start 3dsmax and choose "cylinder" with the following size
     Now place the cylinder like me

[2]-Convert the cylinder into the editable poly now select the polygons
     Apply the extrude polygons with the amount of -12.0

[3]-Your object should like this

[4]-Create two cylinder and place like me

[5]-Select the cylnder and switch to the boolean now boolean the object should like this

[6]-Your object should like this

[7]-Create material like this

[8]-Set the skylight like this with the following parameter

[9]-This is final image as shown below

Hello guys I will show how create a 3dsmax 3d magnets model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Start 3dsmax and choose "Rectangle" with the following size as shown below   
     Create rectangle in the top view port

[2]-Select the rectangle and convert into the editable spline now select the segment and deleted now 

[3]-Select the corner vertexes and apply the fillet with the good following amount as shown below

[4]-Again select the vertexes and drag like this

[5]-After all create rectangle like this now open the rendering palette select the enable in rendering and enable in view port options
     Then select the rectangle mode and use the following setting as shown below

[6]-Your rectangle should like this

[7]-Select the rectangle and convert into the editable poly and select the polygons

[8]-Switch to the slice plane now set the slice plane like this in the top view port
     Then click on the slice button

[9]-Your object should like this

[10]-Create one more copy and place like me

[11]-Create rectangle and open the rendering palette now use the below setting

[12]-When use the above setting now create multiples rectangle like this

[13]-This is final image

Hello guys I will show how create a 3dsmax 3d letters model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Click on the Box button and create a box with the following size  
    Place like me

[2]-Now switch to the line button and create line like this in the top view port

[3]-Select the vertex and apply the fillet 6.0

[4]-Your line should like this

[5]-Apply the extrude modifier on the line

[6]-Create one more copy of the line and place like me

[7]-Set skylight like this with the follwing parameter as shwon below

[8]-This is final image of letter

Hello guys I will show how create a 3dsmax 3d lamp model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Start 3dsmax and choose "Tube" with the following size
     Now place the tube like me

[2]-Open the rendering palette and now use the following setting then create shape like me

[3]-Create chamfer cylinder and place like me

[4]-Create another chamfer cylinder and apply the taper modifier with the good following amount as shown below

[5]-Apply the FFD 3×3x3 modifier and select the control point now drag the control point like me

[6]-Your oject should like this

[7]-Create the material like this

[8]-Set the skylight like this with the following parameter

[9]-This is final image as shown below

Hello guys I will show how create a 3dsmax 3d electronic plug model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Click on the chamfer box button and create chamfer box with the following size  
    Place like me

[2]-Now create cylinder with the following size and now place like me

[3]-Now switch to the boolean now boolean the cylinder should like this

[4]-Create chamfer box and place like me

[5]-Create cylinder and now boolean it

[6]-Create chamfer cylinder and two boxes now place like me

[7]-Now boolean the boxes like this 
 

[8]-This is my material palette

[9]-Set the skylight like this with the following parameters

[10]-This is the final image of electronic plug
       thanks for watching

Hello guys I will show how create a 3dsmax 3d chairs and table model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Start 3dsmax and choose "Line" and open the rendering palette
     Now use the following setting then create shape like me

[2]-Create one more copy and place like me

[3]-Now click on the attach button and attach the both spline like this

[4]-Select the both un join vertexes and now switch to the fuse> connect> weld

[5]-Now you will see the both vertexes are joined

[6]-Now your object should like this

[7]-Create chamfer box and apply the FFD 3×3x3 now select the control point
     Drag like this

[8]-Again create one chamfer box and apply the FFD 3×3x3 now select the control point
     Drag like this

[9]-Create two chamfer cyinder and four boxes

[10]-Now apply the taper modifier on the boxes like me

[11]-Your object should like this

[12]-This is my materials

[13]-Set the skylight like this with the following parameter

[14]-This is final image as shown below

Hello guys I will show how create a 3dsmax 3d 120V Appliance Switch model tutorial.
I have used following techniques shown below in this 3ds max tutorial.

[1]-Click on the chamfer box button and create chamfer box with the following size  
    Place like me

[2]-Now create three rectangles with the following size and apply the extrude modifier with the amount of 8.5
     Place the rectangles like me

[3]-Now switch to the boolean the now boolean the rectangle like me

[4]-Create two cylinders and now similarly boolean the cylinders like this

[5]-This time create chamfer cylinder and box now place like me

[6]-Now again switch to the boolean and now boolean the box like me

[7]-This is my material window

[8]-Set the skylight like this with the following parameters

[9]-This is the final image of 120V Appliance Switch
     thanks for watching