tutorialqueen.com

Here I will tell you about 3dsmax 3d model beach chair studio tutorial.
I have used following techniques in this 3ds max tutorial.
Modeling with the help of Bend and boxes.

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Standard primitives > Box use the following setting
Create a Box in the top view and set like this

[3]-select the box applying the Bend Modifier and Turbo Smooth Modifier
And your image should like this

[4]-Select the Box press holds (Shift key) drag it and release you will see clone window is open
Use the following setting

[5]-Click on the Geometry > Standard primitives > Box use the following setting
Create a another Box in the top view and set like this

[6]-select the box applying the Bend Modifier and Turbo Smooth Modifier
And your image should like this

[7]-Select the Box press holds (Shift key) drag it and release you will see clone window is open
Use the following setting

[8]-Click on the Geometry > Standard primitives > Cylinder use the following setting
Create a cylinder in the front view

[9]-Select the cylinder press holds (Shift key) drag it and release you will see clone window is open
Use the following setting

[10]-Press (M) and you will see the material window is open
An import a two maps like this which i can import and use the following setting
And assign to the object

[11]-Now add some light press (F9) you will see the final image ready
Save the file in your folder

blender 3d models
bryce 3d graphics
create 3d models

Here I will teach you about 3dsmax 3dmodelbolt studio tutorial.
How create a 2d shape convert into 3d object

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting set the
Plane like this perspective view image as shown below

[2]-Now click on the Shape > Spline > NGon use the following setting and create a Shape like this in the Top view
Image as shown below

[3]-Apply the Bevel Modifier and use the following setting

[4]-Now your object should be like this in the front view

[5]-Click on the Geometry > Standard primitives > Cylinder and use the following setting
And apply the Twist Modifier use the following setting image as shown below

[6]-Again creating cylinder and use the following setting set cylinder like this in the front view

[7]-Press (M) you will see the material window is open
An import a Steel map like this image as shown below

[8]-Now add some lighting effect press (F9) you will see the final image is ready save the file in your folder

3d model program
3d model tutorial
3d motion graphics

Here I will teach you about 3dsmax 3d model cartboot studio tutorial.
I have used following techniques in this 3ds max tutorial.
Editable Poly and box modeling techniques

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting set the
Plane like this perspective view image as shown below

[2]-Now click on the Geometry > Standard primitives > Tube Use the following Setting creates a two Tube like this
In the front view

[3]-Your object should be like this

[4]-Select the Tube Right select Editable poly and select the polygon mode in the Editable poly

[5]-Make a selection like this

[6]-Then click on the Extrude button

[7]-Now you will see Extrude parameter palette is open Use the following Setting

[8]-Your object should be like this

[9]-Select the Object press holds (Shift key) drag it and release you will see clone window is open
Use the following setting and now your object should be like this

[10]-Now click on the Geometry > Standard primitives > Cylinder Use the following Setting creates a Cylinder like this
In the left view

[11]-Set like this in the top view image as shown below

[12]-Now click on the Geometry > Standard primitives > Box Use the following Setting creates a box like this
In the top view Set like this in the top view image as shown below

[13]-Use the following Setting again create box in the top view

[14]-Select the Object press holds (Shift key) drag it and release you will see clone window is open
Use the following setting and now your object should be like this

[15]-Now click on the Geometry > Standard primitives > Cylinder Use the following Setting creates a Cylinder like this
In the left view and set like this

[16]-Select the Object press holds (Shift key) drag it and release you will see clone window is open
Use the following setting and now your object should be like this

[17]-Use the following setting again create a cylinder in the front view and set like this image as shown below

[18]-Now press (M) and you will see the material window is open
I can make two materials in the first material i can import a wood map
In the second material just i can import a bricks map and increase tiling option

[19]-Now add lights as you like press (F9) and you will see the final image is ready
Save the file in your folder

3d model converter
3d model creator
3d model design

Here I will tell you about 3dsmax 3dmodelcokecane studio tutorial.
I have used following techniques in this 3ds max tutorial.
Edit poly modifier modeling.

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Standard primitives > Cone and use the following setting
Create a box in the top view and set like this in the front view

[3]-Now Apply Edit poly Modifier
Select the Polygon mode then make a selection like this

[4]-Click on the extrude Button in the Edit poly modifier parameter use the following setting
Now your object should like this

[5]-Again make a selection like this Click on the extrude Button in the Edit poly modifier parameter
Now your object should like this

[6]-Now select the vertex in the Edit poly Modifier and se the vertex like this

[7]-Then apply the Turbo smooth Modifier and use the following setting

[8]-Now your image should like this

[9]-Press (M) and you will see the material window is open
I can make two material In the First material I can Import coke Jpg and
the material pick the steel color and give some shinning

[10]-Now Add some light effect Press (F9) you will see the final image is ready
Save the file in your folder

stock 3d models
vrml model
working model 3d

Here I will tell you about 3dsmax 3d model fork studio tutorial.
I have used following techniques in this 3ds max tutorial.
Edit poly modifier modeling.

[1]-First of all you will press (ctrl +N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting
Create a plane in the top view and set like this

[2]-Click on the Geometry > Standard primitives > Box and use the following setting
Create a Cylinder in the top view and set like this in the left view

[3]-Now Apply Edit poly Modifier
Select the Vertex mode in the Edit poly Modifier

[4]-Now make a selection like this

[5]-Now set the vertex’s like this

[6]-Make a selection like this and pick the Select & Uniform Scale tool in the main tool bar
Drag the vertex like this

[7]-Make a selection like this the and again drag the vertex’s like this

[8]-Now this time select the polygon mode in the edit poly modifier
And make a selection like this and click on the Bevel button
You will see the Bevel window is open use the following setting

[9]-Then pick the Select & Uniform Scale tool in the main tool bar
Drag the selection like this in the front view

[10]-Your object should like in the top and left respectively

[11]-Now applying the Mesh Smooth Modifier and use the following setting

[12]-Use the following setting make a material like and assign to the fork

[13]-After assign to the object (F9) you will see the final image ready save the file in your folder

how to build a 3d model
how to make 3d graphics
iges model

Here I will tell you about 3dsmax 3d model skates studio tutorial.
I have used following techniques in this 3ds max tutorial.
FFD Box modifier & How to work soft selection.

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Standard primitives > box use the following setting
Create a box in the top view and set like this

[3]-Now apply the FFD Box modifier with 5×5x5 these number of point

[4]-Now select the control point and select the both corner (edges point) set like this image as shown below point drag like this

[5]-Then in the left view drag like this

[6]-Now your object should be like this

[7]-Apply the Mesh Smooth Modifier your object should be like this

[8]-Create a cylinder in the top view and set like this right click selects the Editable poly then select the polygon
In the Editable poly

[9]-Now make a selection like this open soft selection window pick the select & Move tool and drag like this
Same treatment for second face

[10]-select the cylinder press holds (Shift key) drag it and release you will see clone window is open
Use the following setting now set like this in the top view

[11]-Press (M) and you will see the material window is open
First of all click on the diffuse button then select the checker open the checker parameter
Use the following setting your checker map should like this
In the second material import a brick map then open the tiling option and use the following setting
Your bricks map should like this

[12]-Now after assign the material now your object should be like this

blender 3d models
bryce 3d graphics
create 3d models

Here I will tell you about 3dsmax 3d model soft drink cane studio tutorial.
I have used following techniques in this 3ds max tutorial.
FFD Box modifier and Edit poly modifier Modeling technique.

[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Extended primitives > Chamfer box use the following setting
Create a box in the top view and set like this

[3]-Now apply the FFD Box modifier and open the Edit poly window then select the polygon mode
Make a selection like this image as shown below

[4]-Click on the Extrude button and use the following setting

[5]-Again Select the polygon mode in the Edit poly and Make a selection like this image as shown below
Click on the Extrude button and use the following setting
Now your image should like this image as shown below

[6]-Now apply the FFD Box modifier and select the point like this
Set like this in the front view

[7]-Now again select the Point like this Set like this

[8]-Select the point like this now set like this in the left view
After adjust the point now your box should like this

[9]-Click on the Geometry > Standard primitives > Cylinder
Create a cylinder in the top view and set the cylinder like this in the front

[10]-Now apply the Bend Modifier and use the following setting
Your cylinder should like this

[11]-Press (M) and you will see the material window is open
In the first material just pick a color and give some shining
In the second material you can import a map like this

[12]-After assign material press (F9) you will see the final image is ready
Save the file in your folder

3d model program
3d model tutorial
3d motion graphics

Here I will tell you about 3dsmax 3dmodel spoon studio tutorial.
I have used following techniques in this 3ds max tutorial.
FFD Box modifier technique.

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Standard primitives > box use the following setting
Create a box in the top view and set like this

[3]-Now apply the FFD Box modifier with 4×12x4 these number of point

[4]-Now select the control point and select the point drag like this

[5]-Again set the point like this in the top view

[6]-Now select the point like this

[7]-Drag like this in the left view

[8]-Now your spoon should be like this

[9]-Then apply the Mesh Smooth Modifier and use the following setting

[10]-Now your spoon should be like this

[11]-Click on the Light > Standard > Omni and use the following setting

[12]-Now set the Omni like this

[13]-Click on the Camera > Standard > Target and use the following setting

[14]-Now set the Camera like this

[15]-Press (M) and you will see the material window is open
An import a map Steel map and give some shining now assign to the spoon

[16]-After assign material press (F9) you will see the final image is ready
Save the file in your folder

3d model converter
3d model creator
3d model design

Here I will tell you about 3dsmax 3d model sweet studio tutorial.
I have used following techniques in this 3ds max tutorial.
Edit poly Modifier Modeling.

[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the Plane and use the following setting set the plane like this in the
Perspective view

[2]-Click on the Geometry > Standard primitives > Cylinder
Create a Cylinder in the Left view and set the Cylinder like this in the Front view

[3]-Select the cylinder then Applying the Edit poly Modifier
Select the Polygon mode in the Edit poly Modifier
Now make a selection like this Image as shown below

[4]-Press delete button now your cylinder should like this in the perspective view

[5]-Then applying the Shell modifier and use the following setting
Now your object should be like this in the perspective view

[6]-Click on the Geometry > Standard primitives > Sphere
Use the following setting now your image should like this in the perspective view

[7]-Now pick the Select & Uniform Scale tool and drag like this in the Front view
After drag the object your image should be like this in the Front view

[8]-Select the Sphere press holds (Shift key) drag it and release you will see clone window is open
Use the following setting now you’re Sphere should like this

[9]-Press (M) and you will see the material window is open
Now in the first just import map like this image as shown below

[10]-In the all material Just pick the color you wants and give some shinning

[11]-Now add some light press (F9) you will see the final image ready
Save the file in your folder

stock 3d models
vrml model
working model 3d

Here I will teach you about 3dsmax 3dmodel tooster studio tutorial.
I have used following techniques in this 3ds max tutorial.
Spline modeling and Boolean techniques

[1]-First of all you will press (ctrl+N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting set the
Plane like this perspective view image as shown below

[2]-Now click on the Shape > Spline > Line and create a line in the front view

[3]-Apply the Bevel Modifier and use the following setting
your image should like this in the top view

[4]-Select the shape hold Shift key and Drag it and release you will see the clone palette is open
Then use the following setting now set the shapes like this in the front view

[5]-Now click on the Shape > Spline > Rectangle and use the following setting
Apply the Bevel Modifier now your rectangle should like this in the front view

[6]-Click on the Geometry > Extended primitives > chamfer box and use the following setting
Create a chamfer box then apply the bend modifier and use the following setting
Now your chamfer box should like this

[7]-Now select the Chamfer box click on the Geometry > Compound Object > Boolean > Pick Operand B
And use the following setting

[8]-Now your Shape should like this and this step is repeated one more time
Your object should be like this

[9]-Create a chamfer cylinder and use the following setting
Set the chamfer cylinder like this in the left view

[10]-Select the chamfer cylinder hold Shift key and Drag it and release you will see the clone palette is open
Then use the following setting now set the chamfer cylinder like this in the left view

[11]-Again create a chamfer cylinder and use the following setting
Set the chamfer cylinder like this in the left view

[12]-Press (M) you will see the material window is open
In the first three material just select the colors and give some shinning

[13]-In the last two materials I pick the noise and tiles default map
And use the following setting

[14]-Press (F9) you will see the final image is ready save the file in your folder

how to build a 3d model
how to make 3d graphics
iges model