tutorialqueen.com

Today I am telling you about How to Create Photoshop design wood spoon stock graphics in photoshop.

[1] Take a new file of 400 pixels, 250 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #734923 your image should look like as shown below do not ‘D’ select.

[4] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[5] Take the “Dodge Tool” & then Highlight the following parts as shown below do not ‘D’ select.

[6] Now press Cntl+Shift+I, With the “Dodge Tool” & then Highlight the following parts do not ‘D’ select.

[7] Take the “Burn Tool” & then create the following Shading with Inverse selection also with the help of Cntl+Shift+I.

[8] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[9] Open a new layer fill the selection with #763b01.

[10] With the “Dodge Tool” & then Highlight the following parts as shown below.

[11] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #c47935.

[12] With the “Dodge Tool” & then Highlight the following parts as shown below.

[13] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #996b49.

[14] Take the “Dodge Tool” & then Highlight the following parts.

[16] Create a new shape with the help of ‘Pen Tool’ fill that layer with #5b3c28.

[17] Take the ‘Dodge Tool’ use these settings.

[18] Now create the following Patch with the help of ‘Dodge Tool’.

[19] Take the ‘Brush Tool’ now press F5 apply the following settings.

[20] Now create a new layer make sure your foreground is set to #927054. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[21] Now open a new document by 400 px 400 px. Then set your foreground and Background color
  fill that layer with #9b591f

[22] Then go to Filter>Render>Fibers apply the following settings.

[23] With the “Dodge Tool” & then Highlight the following parts as shown below.

[24] And now go to your original document then press Cntl+Alt+A to select all layer then press Cntl+E to Merge down layers
then drag your wood texture and rotate now then Cntl+Click spoon layer now press Cntl+Shift+I, after that hit the delete key.

[25] For this layer set Opacity 12%.

[26] Hope you will make modifications and make a more better.

http://tutorialqueen.com/photoshop-tutorials/photoshop-cloning-photo-effect

Today I am telling you about How to Create Photoshop design knife awesome hound stock graphics in photoshop.

[1] Take a new file of 550 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #575757 your image should look like as shown below.

[4] Take the “Dodge Tool” & then move the selection with the the help of [Up Arrow Key]
then press Cntl+Shift+I, & then Highlight the following parts as shown below.

[5] After that create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 4px.

[6] Now press Cntl+Shift+I, With the “Dodge Tool” & then Highlight the following parts as shown below.

[7] Make the duplicate layer with the help of Cntl+J, now go to Filter>Noise>Add Noise
apply the following settings.

[8] Then go to Filter>Blur>Motion Blur use these settings.

[9] For this layer set Opacity by 55%.

[10] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #7c7c7c.

[11] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[12] Now press Cntl+Shift+I, With the “Dodge Tool” & then Highlight the following parts as shown below.

[13] Now repeat step 7 to 9 you should have something like this.

[14] Now like this create the other with above techniques.

[15] After that create the following selection with the help of ‘Pen Tool’ now go to
Select>Modify>Feather Selection by 2px.

[16] Open a new layer fill the selection with #4b4b4b.

[16] Create a new layer [this layer should above background layer] and then create a new shape
with the help of ‘Polygonal Lasso Tool’, fill that layer with #2b2b2b, do not ‘D’ select.

[17] Now move the selection with [Up Arrow Key] now press Cntl+Shift+I, take
the “Dodge Tool” & then Highlight the following parts.

[18] Create a small circle with the help of Elliptical Marquee Tool, fill that layer with #8d8d8d.

[19] Now like create others with shading also.

[20] You’ve already finished this tut with sample details:
This is my final result with some other details.

http://tutorialqueen.com/photoshop-tutorials/photoshop-light-lamp-tutorial

Today I am telling you about How to Create Photoshop design stainless steel tub stock graphics in photoshop.

[1] Take a new file of 500 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Using the “Ellipse Shape Tool” draw a shape as shown below fill that layer with #7c848f.

[3] Take the “Burn Tool” now move the selection with the help of [Up Arrow Key]
& then press Cntl+Shift+I, now create the following Shading with the help of Burn Tool do not ‘D’ select.

[4] Take the “Dodge Tool” & then press Cntl+Shift+I,
now Highlight the following parts as shown below.

[5] After that create the following selection with the help of ‘Ellipse Shape Tool’
then go to Select>Modify>Feather Selection by 1px.

[6] Open a new layer fill the selection with #4e575c.

[7] And now create another selection with the help of ‘Ellipse Shape Tool’
then go to Select>Modify>Feather Selection by 1px.

[8] Now press Cntl+Shift+I, With the “Dodge Tool” & then Highlight the following parts as shown below do not ‘D’ select.

[9] Now press Cntl+Shift+I, take the “Dodge Tool” & then Highlight the following parts.

[10] Create a new layer [this layer should above background layer] and then create a new shape
with the help of Pen Tool, fill that layer with #1c2220.

[11] Take the “Dodge Tool” & then Highlight the following parts.

[12] Take the ‘Brush Tool’ now select your brush see in the next image.

[13] Now create a new layer make sure your foreground is set to #727884. Now create ‘Stroke’ with the help of
‘Ellipse Shape Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[14] With the “Dodge Tool” & then Highlight the following parts as shown below.

[15] You’ve already finished this tut with sample details:
This is my final result with some other details.

http://tutorialqueen.com/photoshop-tutorials/photoshop-b-logo-technique

Today I am telling you about How to Create Photoshop design hardware item stock graphics in photoshop.

[1] Take a new file of 500 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #aeaba6 your image should look like as shown below.

[4] After that create the following selection with the help of ‘Pen Tool’ now hit the delete key.

[5] And now Cnlt+Click this layer go get selection then go to
Select>Modify>Contract Selection by 2px.

[6] Take the “Burn Tool” & now press Cntl+Shift+I, & then create the following Shading
with the help of Burn Tool and now ‘D’ select.

[7] Then Cntl+Click again to get selection then move the selection with [Right & Down Arrow Key]
now go to Select>Modify>Feather Selection by 1px.

[8] Take the “Dodge Tool” & now press Cntl+Shift+I, & then Highlight the following parts as shown below.

[9] Now like this create the following Shading as created in the previous step.

[10] Take the ‘Burn Tool’ apply the following settings.

[11] With the “Burn Tool” create the following Shading as shown below.

[12] Make the duplicate layer with the help of Cntl+J, then go to
Filter>Noise>Add Noise apply the following settings.

[13] And then go to Filter>Blur>Motion Blur use these settings.

[14] For this layer set Opacity by 60%.

[15] Take the ‘Brush Tool’ now press F5 apply the following settings.

[16] Now create a new layer make sure your foreground is set to Black.  Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[17] Now like this create the other with above techniques.

[18] Now create a new shape with the help of ‘Elliptical Marquee Tool’ fill that layer with #a5a7a2. And then
Move the selection with [Down Arrow Key] then go to Select>Modify>Feather Selection by 4px.

[19] With the “Dodge Tool” & then Highlight the following parts as shown below now ‘D’ select.

[20] Then Cntl+Click again this layer to get selection now move the selection also with down arrow key,
take the “Dodge Tool” & then Highlight the following parts do not ‘D’ select.

[21] Now press Cntl+Shift+I, With the “Burn Tool” create the following Shading as shown below.

[22] You’ve already finished this tut with sample details:
This is my final result with some other details.

http://tutorialqueen.com/photoshop-tutorials/photoshop-open-page-animation

Today I am telling you about How to Create Photoshop design garnet jewelry ring logo stock graphics in photoshop.

[1] Take a new file of 425 pixels, 450 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #9e9e9e your image should look like as shown below.

[4] Now create the following selection with the help of ‘Ellipse Shape Tool’ then hit the Delete key.

[5] Take the “Dodge Tool” & then Highlight the following parts as shown below.

[6] Now take the ‘Brush Tool’ then press F5 apply the following settings.

[7] Now create a new layer make sure your foreground is set to Black. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[8] Now like this create the other with above techniques.

[9] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #9f9f9f.

[10] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[11] With the “Dodge Tool” & then Highlight the following parts as shown below.

[12] Now create another selection with ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[13] Take the “Burn Tool” & then create the following Shading
with the help of Burn Tool.

[14] Now like this create the following Shading as created in the previous step.

[15] Create a new layer [this layer should above background layer]  and then create a new shape
with the help of Pen Tool, fill that layer with #979797.

[16] With the “Dodge Tool” & then Highlight the following parts as shown below.

[17] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 2px.

[18] Open a new layer fill the selection with Black color.

[19] Now like this create the other with above techniques.

[20] Create a new shape with the help of ‘Pen Tool, fill that layer with #d1d1d1.

[21] For this shape add the following layer styles.

[22] Create another shape with the help of ‘Pen Tool’ fill that layer with any color would you like.

[21] After that create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 3px.

[22] With the “Burn Tool” create the following Shading as shown below.

[23] Now like this create the following Shading as created in the previous step.

[24] For this shape add the following Layer Styles.

[25] You’ve already finished this tut with sample details:
This is my final result with some other details.

http://tutorialqueen.com/photoshop-tutorials/photoshop-glass-bottle-technique

Today I am telling you about How to Create Photoshop design banana plug stock graphics in photoshop.

[1] Take a new file of 425 pixels, 300 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #283f47 your image should look like as shown below do not “D” select.

[4] Create the following selection with the help of ‘Polygonal Lasso Tool’ then go to
Select>Modify>Feather Selection by 2px.

[5] Take the “Burn Tool” & then create the following Shading
with the help of Burn Tool.

[6] Now like this create the following Shading as created in the previous step.

[7] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #c6b5ab do not ‘D’ select.

[8] Now move the selection with [Down and Right Arrow Key] now press Cntl+Shift+I,
With the “Burn Tool” create the following Shading as shown below do not ‘D’s select.

[9] Take the “Dodge Tool” & then Highlight the following parts as shown below do not ‘D’ select.

[10] Now like this create the following Shading as created in the previous step.

[11] Create a new layer [this layer should below previous layer] and then create a new shape
with the help of Pen Tool, fill that layer with #d9b09a.

[12] Now create the following selection with the help of ‘Polygonal Lasso Tool’
take the “Burn Tool” create the following Shading do not ‘D’ select.

[13] Now press Cntl+Shift+I, take the “Burn Tool” create the following Shading.

[14] With the “Dodge Tool” & then Highlight the following parts as shown below.

[15] Create the following selection with the help of ‘Polygonal Lasso Tool’ then go to
Select>Modify>Feather Selection by 1px.

[16] Open a new layer fill the selection with Black color.

[17] Now like this create the other with above techniques.

[18] Create a new shape with ‘Polygonal Lasso Tool’ fill that layer with #9b885e.

[19] With the “Dodge Tool” & then Highlight the following parts as shown below.

[20] Create a new shape with the help of ‘Ellipse Shape Tool’ fill that layer with #101d23.

[21] After that create the following selection with the help of  ‘Ellipse Shape Tool’ now press Cnt+Shift+I,
With the “Dodge Tool” & then Highlight the following parts as shown below.

[22] Now take the ‘Brush Tool’ & then press F5 apply the following settings.

[23] Now create a new layer make sure your foreground is set to White. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[24] Now like this create the other with above techniques.

[25] Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learn some
Photoshop Techniques  & the Final Image should look like as shown below.

http://tutorialqueen.com/photoshop-tutorials/photoshop-vip-suit-case

Today I am telling you about How to Create Photoshop design beaker stock graphics in photoshop.

[1] Take a new file of 400 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #dfe1e0 your image should look like as shown below.

[4] Take the “Dodge Tool” & then Highlight the following parts as shown below.

[5] Now create the following selection with the help of ‘Pen Tool’ then go to
Select>Modify>Feather Selection by 1px.

[6] Open a new layer fill the selection with #ababab.

[7] Now take the ‘Dodge Tool’ use these settings.

[8] And then create ‘Stroke’ with the help of ‘Pen Tool’ now right click select ‘Stroke Path’
then select ‘Dodge’ click ok.

[9] Now like this create the other with above techniques.

[10] Create a new shape with the help of ‘Ellipse Shape Tool’ fill that layer with #afafaf, do not ‘D’ select.

[11] Then go to Select>Modify>Contract Selection by 1px.

[12] With the “Dodge Tool” & then Highlight the following parts as shown below.

[13] Now like this create the other with above techniques.

[14] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok & fill the selection with #760d09.

[15] With the “Dodge Tool” & then Highlight the following parts as shown below.

[16] Create a new shape with the help of ‘Pen Tool’ fill that layer with #e3e3e3.

[17] After that for this layer change the Blending Mode to ‘Overlay’ and set Opacity by 55%.

[18] Create the following shape with the help of ‘Pen Tool’ give the Feather also by 1px then
fill that layer with White color.

[19] Create a new shape with the help of ‘Pen Tool’ fill that layer with #8f968f, now go to
Select>Modify>Contract Selection by 2px.

[20] Take the “Burn Tool” & then press Cntl+Shift+I, now create the following Shading
with the help of Burn Tool do not ‘D’ select.

[21] Take the “Dodge Tool” & then Highlight the following parts.

[22] Hope you will make modifications and make a more better.

http://tutorialqueen.com/photoshop-tutorials/photoshop-chinese-bowl-icon

Today I am telling you about How to Create Photoshop design Duplex stainless steel tube stock graphics in photoshop.

[1] Take a new file of 400 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #8f8f99 your image should look like as shown below do not ‘D’ select.

[3] Take the “Dodge Tool” & then Highlight the following parts as shown below.

[4] Create a new shape with the help ‘Ellipse Shape Tool’ fill that layer with #212025.

[5] With the “Dodge Tool” & then Highlight the following parts as shown below.

[6] Take the ‘Brush Tool’ set your brush size see in the next image.

[7] Now create a new layer make sure your foreground is set to #6e6e7a. Now create ‘Stroke’ with the help of
‘Ellipse Shape Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[8] Take the “Dodge Tool” & then Highlight the following parts.

[9] Create a new shape with the help of ‘Polygonal Lasso Tool’ then go to
Select>Modify>Feather Selection by 1px.

[10] Open a new layer fill the selection with Black color.

[11] Now like this create the other with above techniques.

[12] Take the ‘Brush Tool’ now press F5 apply the following settings.

[13] Now create a new layer make sure your foreground is set to Black. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[14] Now like this create the other with above techniques.

[15] Now press Cntl+Alt+A to select all layer now press Cntl+E, to Merge Down layers, then
go to Blending Option use these settings.

[16] Hope you will make modifications and make a more better.

http://tutorialqueen.com/photoshop-tutorials/photoshp-silver-locket-icon

Today I am telling you about How to Create Photoshop design shaking spoon stock graphics in photoshop.

[1] Take a new file of 400 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #969289 your image should look like as shown below.

[4] Take the “Dodge Tool” & then Highlight the following parts as shown below.

[5] Create a new shape with the help of ‘Rounded Rectangle Shape Tool’ fill that layer with #c1c5c8.

[6] With the “Dodge Tool” & then Highlight the following parts as shown below.

[7] Take the “Burn Tool” & then create the following Shading
with the help of Burn Tool.

[8] After that create the following selection with the help of ‘Rounded Rectangle Shape Tool’
then go to Select>Modify>Feather Selection by 2px.

[9] And now open a new layer fill the selection with Black color.

[10] Create another shape with the help of ‘Rounded Rectangle Shape Tool’
fill that layer with #afafad.

[11] With the “Dodge Tool” & then Highlight the following parts as shown below.

[12] Now create the following shape with the help of ‘Pen Tool’ fill that layer with #b7bcc0.

[13] Take the “Dodge Tool” & then Highlight the following parts.

[14] Now like this create the other with above techniques.

[15] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok & fill the selection with #e1e5e8 do not ‘D’ select.

[16] And now move the selection with the help of [Left Arrow Key] then go to Select>Modify>Feather Selection by 1px.

[17] Then press Cntl+Shift+I, take the “Dodge Tool” & then Highlight the following parts do not ‘D’ select.

[18] Now select ‘Burn Tool’ & create the following shading with inverse selection Ctrl+Shift+I.

[19] Create a new shape with the help of ‘Pen Tool’ fill that layer with #1c1d21.

[20] With the “Burn Tool” create the following Shading as shown below.

[21] Take the ‘Brush Tool’ set your brush size see in the next image.

[22] Now create a new layer make sure your foreground is set to black. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[23] You’ve already finished this tut with sample details:
This is my final result with some other details.

http://tutorialqueen.com/photoshop-tutorials/photoshop-color-pallete-icon

Today I am telling you about How to Create Photoshop design soup spoon stock graphics in photoshop.

[1] Take a new file of 300 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.

[2] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3] In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok
& fill the selection with #90928d your image should look like as shown below.

[4] Take the “Dodge Tool” & then Highlight the following parts as shown below.

[5] Create a new shape with the help of ‘Elliptical Marquee Tool’ fill that layer with #b0b0a6.

[6] Now create the following selection with the help of ‘Rectangular Marquee Tool’
With the “Dodge Tool” & then Highlight the following parts as shown below.

[7] Take the “Burn Tool” & then create the following selection with the help of ‘Rectangular Marquee Tool’
& now create the following Shading with the help of Burn Tool.

[8] Now like this create the following Shading as created in the previous step.

[9] After that create the following selection with the help of ‘Pen Tool’
then go to Select>Modify>Feather Selection by 1px.

[10] With the “Burn Tool” create the following Shading as shown below.

[11] Now like this create the following Shading as created in the previous step.
With the help of ‘Dodge Tool’ and Burn Tool.

[12] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok & fill the selection with #768485 do not ‘D’ select.

[13] And now move the selection with the help of [Left Arrow Key] then take the
“Dodge Tool” & then Highlight the following parts with Inverse Selection also Cntl+Shift+I.

[14] And now create the following selection with the help of ‘Pen Tool’
then go to Select>Modify>Feather Selection by 1px.

[15] Open a new layer fill the selection with Black color.

[16] Now like this create the other with above techniques.

[17] Take the ‘Brush Tool’ set your brush size see in the next image.

[18] Now create a new layer make sure your forground is set to #95999a. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[19] With the “Dodge Tool” & then Highlight the following parts as shown below.

[20] Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learn some
Photoshop Techniques  & the Final Image should look like as shown below.

http://tutorialqueen.com/photoshop-tutorials/photoshop-website-header-layout