Let’s see, how to create.

[1]-First of all Open New Document of Custom size, Height & Width 400×400 pixels, Resolution 72 & Mode RGB Color.

[2]-Now Open New Layer & then create the following shape with the help of ‘Elliose Shape Tool’ & press right click > make selection.

[3]-Now fill the #’585858′ color in selection area.

[4]-Now select the ‘Dodge Tool’ & Highlight the some parts.

[5]-Now go to Blending Options,& use the following settings
Photoshop Technique-How to use the Blending Options feature.

[6]-Now create shape with the help of ‘Ellipse Shape Tool’ & press right click > make selection & fill with # ‘ 02029d’ color
then select the ‘Burn Tool’ & create the following shading.

[7]-Now go to Blending Options,& use the following settings
Photoshop Technique-How to use the Blending Options feature.

[8]-Now create the selection with the help of Rectangular Marquee at new layer & press right click & go to the ‘Feather Option’ gives
the ‘Feather Radius’ 3 pixels then fill with # ‘0c57e2′ color.

[9]-Now create another selection with the help of Rectangular Marquee at new layer & press right click & go to the ‘Feather Option’ gives
the ‘Feather Radius’ 5 pixels then fill with # ‘1890dc’ color.

[10]-Now select the ‘Burn Tool’& create the following shading.

[11]-Now create shape with the help of ‘Pen Tool’ & press right click > make selection & fill with #’8d8dea’ color
then create the following shading with the help of Burn Tool.

[12]-Similarly create the other shapes should look like as shown below.

[13]-Now your ‘Final’ image should look like as shown below.

http://tutorialqueen.com/photoshop-tutorials/photoshop-vip-suit-case

[1]-Start 3dsmax and choose “Box” with the following size as shown below   
     Create two boxes in the top view port

[2]-Create one more box and set like this

[3]-Select the box and convert into the editable poly now select the edges then
     Apply the extrude edges with the good following amount as shown below

[4]-Your object should like this

[5]-Create four cylinder and set like this

[6]-Now Boolean the cylinders like me
  

[7]-Your object should like this

[8]-Create two planes like this

[9]-This is my material palette

[10]-Set the skylight like this with the following parameter as shown below

[11]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-lava-lamp-icon

[1]-Start 3dsmax and choose “Chamfer Cylinder” with the following size as shown below   
     Create chamfer cylinder in the left view port

[2]-Apply the FFD modifier now select the control point then drag the control point like this

[3]-Create another chamfer cylinder and set like this

[4]-Create one more chamfer cylinder and again apply the FFD modifier now select the control point then drag the control point like this

[5]-Your object should like this

[6]-Create another chamfer cylinder and apply the taper modifier with the good following amount as shown below

[7]-This is my material palette and creates materials something like that

[8]-Set the skylight like this with the following parameter with the following amount as shown below

[9]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-measurement-bottle-icon

[1]-Start 3dsmax and choose “Chamfer cylinder” with the following size as shown below
     Create chamfer cylinder like this in the front view port

[2]-Create four more small chamfer cylinder now set like this

[3]-Create one more chamfer cylinder now set like this
 

[4]-Now select the Boolean and now boolean the object like this

[5]-Your object should like this

[6]-Select the object and convert into the editable poly now select the polygon mode
     Select the polygons and apply the extrude polygon with the amount of 0.7

[7]-Your object should like this and create more copy also

[8]-Create another chamfer cylinder and apply the FFD modifier now select the control point then drag the control point like this

[9]-Create one more chamfer cylinder and set like this

[10]-Create two rectangles and apply the extrude modifier with the amount of 8.0
       Now set like this

[11]-Create four chamfer cylinder and set like this

[12]-This time create NGon with the six sides now apply the extrude modifier with the amount of 2.0

[13]-This is my material palette and creates something materials like me

[14]-Set the skylight like this with the following parameter as shown below

[15]-This is my final result please send me comments

http://tutorialqueen.com/photoshop-tutorials/photoshop-leather-belt-icon

[1]-Start 3dsmax and choose “Box” with the following size as shown below   
     Create box in the front view port

[2]-Select the box and convert into the editable poly now select the polygon mode with the ignore back facing

[3]-Make selection and apply the extrude polygons with the amount of -3.0

[4]-Again make selection and apply the extrude polygon with the amount of -5.6

[5]-Your object should like this

[6]-Now create some boxes like this

[7]-Create two more boxes and now Boolean it

[8]-Your object should like this

[9]-Create door like this with the help of boxes

[10]-Create another boxes and set like me
       Create more like this

[11]-Create two more like this

[12]-This is my material palette and creates some thing material like that

[13]-Set the skylight like this with the following parameter

[14]-This is my final result are you looking it

http://tutorialqueen.com/photoshop-tutorials/photoshop-star-charms-icon

[1]-Start 3dsmax and choose “Chamfer Cylinder” with the following size as shown below   
     Create chamfer cylinder in the left view port

[2]-Now apply the taper modifier with the good following amount as shown below

[3]-Select the chamfer cylinder and convert into the editable poly now make selection and apply the extrude polygons with the amount of -84.7

[4]-Your object should like this

[5]-Again make selection and apply the extrude polygons with the amount of -0.4

[6]-Select the edges and apply the extrude edges with the good following amount as shown below

[7]-Your object should like this

[8]-Your object should like this

[9]-Create chamfer box and cylinder and set like this

[10]-Select the cylinder and convert into the editable poly now make selection then apply the extrude polygon with the amount of -1.8

[11]-Your cylinder should like this

[12]-Click in the line button and open the rendering palette now create line like this
  

[13]-This is my material palette and create material some thing like that

[14]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-leather-wallet-technique

[1]-Start 3dsmax and choose “Box” with the following size as shown below   
     Create eight boxes in the front view port

[2]-Again create eight more boxes and set like this

[3]-Create more boxes and put like me

[4]-Select the every box individually now convert into the editable poly then select the edges
     Apply the chamfer edges with the amount of 0.03

[5]-Your boxes should like this

[6]-Create spheres and set like this

[7]-This is my material palette and create material some thing like that

[8]-Set the skylight like this with the following parameter as shown below

[9]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-hanging-heart-technique

[1]-Start 3dsmax and choose “Rectangle” with the following size as shown below   
     Create rectangle in the top view port

[2]-Select the rectangle and convert into the editable spline now select the segment and deleted now 

[3]-Select the corner vertexes and apply the fillet with the good following amount as shown below

[4]-Again select the vertexes and drag like this

[5]-After all create rectangle like this now open the rendering palette select the enable in rendering and enable in view port options
     Then select the rectangle mode and use the following setting as shown below

[6]-Your rectangle should like this

[7]-Select the rectangle and convert into the editable poly now select the corner edges then apply the chamfer edges with the amount of 0.42

[8]-Your rectangle should like this

[9]-Select the polygons like this in the top view port and click on the slice plane now set the slice plane like this in the top view port
     Then click on the slice button

[10]-Now you will see the one more polygon are created and similarly create one more as done above
       

[11]-This is my material palette create something materials like this

[12]-Set the skylight like this with the following parameter as shown below

[13]-This is my final result

http://tutorialqueen.com/

[1]-Start 3dsmax and choose “Box” with the following size as shown below   
     Create four boxes in the top view port

[2]-Create more boxes and set like this

[3]-Choose the rectangle and use the following setting

[4]-Set the rectangle like this

[5]-Create one more box and set like this

[6]-Use the following setting now create line like this in the top view port

[7]-Create box and convert into the editable poly now select the vertex mode and drag the vertexes like this

[8]-Create another box and Boolean it

[9]-Your object should like this
     Create door with the help of box

[10]-Create another rectangle and now Boolean it

[11]-Your object should like this

[12]-This is material palette and creates something material like me

[13]-Set the skylight like this with the following parameter as shown below

[14]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-scissor-icon

[1]-Start 3dsmax and choose “Chamfer cylinder” with the following size as shown below
     Create chamfer cylinder in the front view port

[2]-Now apply the bend modifier with the good following amount as shown below

[3]-Create another chamfer cylinder and set like this

[4]-Now Boolean it

[5]-Create two more chamfer cylinder now set like this

[6]-Open the material window and make material like me

[7]-Set the skylight like this with the following parameter as shown below

[9]-This is my final result

http://tutorialqueen.com/photoshop-tutorials/photoshop-atlantic-snowfall-wallpaper