Photoshop Tutorials | tutorialqueen.com

Archive for the ‘Photoshop Tutorials’

Photoshop Internet I Logo Stock Photo

Hi Friends! Today I am telling you about How to Create Photoshop Internet I Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[3]-Now fill the selection with ‘cbccd0′ color & create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[4]-Now select ‘Burn Tool’ & create the following shading

[5]-Now select ‘Dodge Tool’ & create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[6]-In Stroke Path select ‘Dodge’ & tick on ‘Simulate Pressure’ & then ok & your image should look like as shown below

[7]-Now go to Blending Options select Color Overlay & use the following settings
Photoshop Technique-How to use the Color Overlay features

[8]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[9]-Now fill the selection with same color & create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[10]-Now create the following shading with the help of ‘Burn Tool’

[11]-Now go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[12]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[13]-Now fill the selection with same color & create the following selection with the help of ‘Pen Tool’ & create the following shading with the help of ‘Burn Tool’ with inverse selection Ctrl+Shift+I

[14]-Now go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[15]-Now select Color Overlay & use the following settings
Photoshop Technique-How to use the Color Overlay features

[16]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[17]-Now fill the selection with same color & create the some shading with the help of ‘Burn Tool’

[18]-No go to Blending Options & use the same Color Overlay features as used in previous steps & after that create the following selection with the help of ‘Pen Tool’

[19]-Now Open New Layer & then fill the selection with same color & create the some shading with the help of ‘Burn Tool’

[20]-Now use the Color Overlay features & after that create the following selection with the help of ‘Elliptical Marquee Tool’

[21]-Now Open New Layer & then fill the selection with same color & create the following selection with the help of ‘Elliptical Marquee Tool’ & create the following shading with the help of ‘Burn Tool’

[22]-Now go to Blending Options & use the Color Overlay features & your image should look like as shown below

[23]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Ellipse Tool’ right click select ‘Stroke Path’

[24]-In Stroke Path select ‘Brush’ & tick on ‘Simulate Pressure’ & then ok & create the some shading with the help of ‘Burn & Dodge Tool’

[25]-Now like this create the others

[26]-See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-window-xp-wallpaper

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Caution Indicater Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Caution Indicater Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & the select ‘Rectangular Marquee Tool’ & use the following settings

[3]-Now create the following shape with the help of ‘Rectangular Marquee Tool’ right click select ‘Make Selection’

[4]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[5]-Now fill the selection with ‘848a97′ color & then select ‘Burn Tool’ & create the following shading

[6]-Now select ‘Dodge Tool’ & Highlight the some parts like as shown below

[7]-Now go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[8]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[9]-Now fill the selection with any color & then go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[10]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[11]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[12]-Now fill the selection with same color & create the following shading with the help of ‘Burn & Dodge Tool’

[13]-Now go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[14]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[15]-Now fill the selection with same color & then go to Blending Options select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss features

[16]-Now select Contour Elements & use the following settings
Photoshop Technique-How to use the Contour Elements features

[17]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[18]-Now fill the selection with any color & then go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[19]-Now select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss features

[20]-Now select Contour Elements & use the following settings
Photoshop Technique-How to use the Contoutr Elements features

[21]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[22]=Now select Text Tool & create the any Text

[23]-Nwo select Text Layer & the go to Blending Options select Bevel & Emboss & use the following settings
Photoshop Technique-How to use Bevel & Emboss features

[22]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[23]-Now fill the selection with ‘fffffa’ color & reduce the Opacity of this Layer

[24]-Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learnt some Photoshop Techniques & the Final Image should look like as shown below

http://tutorialqueen.com/

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Download Button Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Download Button Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with ‘000000′ color & then create the following shape with the help of ‘Rounded Rectangle Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,tick on New Selection & then ok & your image should look like as shown below

[4]-Now Open New Layer & then fill the selection with any color & then go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[5]-Now select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[6]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[7]-Now fill the selection with any color & then go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[8]-Now select Inner Glow & use the following settings
Photoshop Technique-How to use the Inner Glow features

[9]-Now select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss features

[10]-Now select Contour Elements & use the following settings
Photoshop Technique-How to use the Contour Elements features

[11]-Now select Color Overlay & use the following settings
Photoshop Technique-How to use the Color Overlay features

[12]-Now your image should look like as shown below

[13]-Now select Text Tool & create the any Text

[14]-Now select Text Layer & then go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[15]-Now select ‘Stroke Structure’ & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[16]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[17]-Now filll the selection with ‘fffffa’ color & then go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[18]-Now press Ctrl+Alt+A & then press Ctrl+E & make the Duplicate Layer with the help of Ctrl+J, press Ctrl+T right click select ‘Flip Vertical’ & then press ENTER

[19]-Now add the Layer Mask on Duplicate Layer with the help of click on following Button which is indicating by hand sign

[20]-Now select Gradient Tool & use the following Gradient & fill in the Mask layer

[21]-See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-leather-wallet-technique

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Iron Clip Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Iron Clip Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 270×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with ‘748089′ color & then select ‘Burn Tool’ & create the some shading

[5]-Now select ‘Dodge Tool’ & Highlight the some parts like as shown below

[6]-Now go to Filter>Noise>Add Noise & use the following settings
Photoshop Technique-How to use the Noise features

[7]-Now your image should look like as shown below

[8]-Now go to Blending Options,select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[9]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[10]-Now fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’

[11]-Now go to Filter>Noise>Add Noise & use the same settings as used in step-6

[12]-Now go to Blending Options select Inner Glow & use the following settings
Photoshop Technique-How to use the Inner Glow features

[13]-Now select ‘Stroke Structure’ & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[14]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[15]-Now fill the selection with ‘dd312a’ color & create the following selection with the help of ‘Pen Tool’ & create the some shading with the help of ‘Burn Tool’ with inverse selection Ctrl+Shift+I

[16]-Now Open New Layer [this layer should below all layers] & then create the following selection with the help of ‘Pen Tool’

[17]-Now fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’

[18]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[19]-Now fill the selection with same color & create the some shading with the help of ‘Burn & Tool’

[20]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[21]-In Stroke Path select ‘Brush’ & then ok & your image should look like as shown below

[22]-Now select ‘Erase Tool’ & use the following settings

[23]-Now remove the some parts with the help of ‘Erase Tool’

[24]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[25]-Now fill the selection with ‘748089′ color & create the some shading with the help of ‘Burn & Dodge Tool’
Thanks for read this Photoshop Tutorial.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-scan-disk-icon

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Wood Clock Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Wood Clock Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with ‘9e562e’ color & create the following selection with the help of ‘Pen Tool’

[5]-Now select ‘Burn Tool’ & create the following shading with inverse selection Ctrl+Shift+I

[6]-Now create the following selection with the help of ‘Pen Tool’ & create the following shading with the help of ‘Burn Tool’

[7]-Now select ‘Dodge Tool’ & Highlight the some parts & after that Open New Layer & create the following selection with the help of ‘Pen Tool’ & fill with
same color

[8]-Now create the following shading with the help of ‘Burn Tool’

[9]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[10]-Now fill the selection with same color & create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[11]-Now create the following shading with the help of ‘Burn & Dodge Tool’

[12]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[14]-Now create the following selection with the help of ‘Ellipse Tool’ & then fill with same color & create the some shading with the help of ‘Burn Tool’

[15]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[16]-Now fill the selection with ‘dee8eb’ color & then reduce the Opacity of this Layer like as shown below

[17]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[18]-Now fill the selection with same color & then create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[19]-Now create the some shading with the help of ‘Burn & Dodge Tool’

[20]-Now go to Blending Options,select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[21]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[22]-Now fill the selection with same color & then go to Blending Options,select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[23]-Now create the some shading with the help of ‘Burn & Dodge Tool’ & your image should look like as shown below

[24]-Now select 2 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[25]-In Stroke Path select ‘Brush’ & then ok & after that create the following selection with the help of ‘Polygonal Lasso Tool’

[26]-Now Open New Layer & then fill the selection with ‘cf9e84′ color & create the some shading with the help of ‘Burn & Dodge Tool’ & use the same Drop Shadow features as used in step-22

[27]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[28]-Now fill the selection with any color & then go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[29]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[30]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[31]-In Stroke Path select ‘Brush’ & then ok & create the some shading with the help of ‘Burn Tool’

[32]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[33]-In Stroke Path select ‘Brush’ & then ok & like this create the others & your image should look like as shown below

[34]-Now go to Filter>Blur>Gaussian Blur & use the following settings
Photoshop Technique-How to use the Gaussian Blur features

[35]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[36]-In Stroke Path select ‘Brush’ & tick on ‘Simulate Pressure’ & then ok & like this create the others

[37]-Now select ‘Text Tool’ & create the any Text
See below for the Final Photoshop Output.I Hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-website-header-layout

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Wood Cutter Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Wood Cutter Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 290×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[3]-Now fill the selection with ‘b3afac’ color & then select ‘Burn Tool’ & create the some shading

[4]-Now select ‘Dodge Tool’ & Highlight the some parts like as shown below

[5]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selection with ‘cfab85′ color & create the some shading with the help of ‘Burn & Dodge Tool’

[7]-Now go to Filter>Artistic>Under painting & use the following settings

[8]-Now your image should look like as shown below

[9]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[10]-Now fill the selection with ‘886445′ & create the some shading with the help of ‘Burn & Dodge Tool’

[11]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[12]-Now fill the selection with ‘fffffa’ color & create the following selection with the help of ‘Elliptical Marquee Tool’ with hold shift

[13]-Now fill the selection with ‘000000′ color & then Open New Layer & create the following selection with the help of ‘Elliptical Marquee Tool’

[14]-Now fill the selection with ‘afa9a5′ color & then set the 1 pxl Brush Tool,& create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[15]-In Stroke Path select ‘Brush’ & then ok & like this create the others

[16]-Now highlight the some parts with the help of ‘Dodge Tool’

[17]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[18]-Now fill the selection with ‘3c2515′ color & Highlight the some parts with the help of ‘Dodge Tool’

[19]-Now select ‘Brush Tool’ & then press F5 & use the following Brush & Settings

[20]-Now Open New Layer [this layer should below all layers] & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[21]-In Stroke Path select ‘Brush’ & then ok
See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techiques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-top-technique-tutorial

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Silva Slug Trap Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Silva Slug Trap Logo Stock Photo

[1]-First of all Open New Document of Custom Size, Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with ‘857b83′ color & Open New Layer & then create the following selection with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with same color & then select ‘Dodge Tool’ & Highlight the some parts like as shown below

[5]-Now set the 2 pxl Dodge Tool & create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[6]-In Stroke Path select ‘Dodge’ & then ok & like this create the others

[7]-Now create the following selection with the help of ‘Elliptical Marquee Tool’ with feather 2pxl

[8]-Now select ‘Burn Tool’ & create the following shading

[9]-Now select ‘Dodge Tool’ & use the following settings

[10]-Now Highlight the following parts with the help of ‘Dodge Tool’ & your image should look like as shown below

[11]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[12]-Now fill the selection with ‘18171d’ color & then select ‘Burn Tool’ & create the following shading

[13]-Now Highlight the some parts with the help of ‘Dodge Tool’

[14]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[15]-Now fill the selection with same color & create the some shading with the help of ‘Burn Tool’ & after that create the following selection with the help of ‘Pen Tool’

[16]-Now Open New Layer & then fill the selection with ‘5c7130′ color & create the following selection with the help of ‘Pen Tool’ & create the some shading with the help of ‘Burn Tool’ with inverse
selection Ctrl+Shift+I

[17]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[18]-Now fill the selection with ‘08080a’ color & create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[19]-Now Open New Layer & then create the following selection with the help of Rectangular Marquee Tool

[20]-Now fill the selection with ‘5c7130′ color & create the following shading with the help of ‘Burn Tool’

[21]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[22]-In Stroke Path select ‘Brush’ & then ok & like this create the others

[23]-Now create the following shading with the help of ‘Burn Tool’ & your image should look like as shown below

[24]-Now create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[25]-In Stroke Path select ‘Brush’ & then ok & create the some shading with the help of ‘Burn Tool’

[26]-Now go to Filter>Blur>Gaussian Blur & use the following settings
Photoshop Technique-How to use the Gaussian Blur features

[27]-Now like this create the others

[28]-Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learnt some Photoshop Techniques & the Final Image should look like as shown below

http://tutorialqueen.com/photoshop-tutorials/photoshop-color-pallete-icon

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Paint Brush Illustration Logo Stock Photo

Hi Guys! Today I am telling you about How to Create Photoshop Paint Brush Illustration Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with ‘262626′ color & then create the following selection with the help of ‘Pen Tool’ & then fill with ‘434242′ color

[5]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selection with ‘000000′ color & create the following selection with the help of ‘Pen Tool’

[7]-Now fill the selection with ‘c69121′ color & then create the following selection with the help of ‘Pen Tool’

[8]-Now fill the selection with ‘e2ab47′ color & then create the following selection with the help of ‘Pen Tool’

[9]-Now fill the selection with ‘fbd16f’ color & then create the following selection with the help of ‘Pen Tool’ & fill with ‘fffffa’

[10]-Now create the following selection with the help of ‘Pen Tool’ & fill with ‘703703′ color

[11]-Now like this create the others & after that Open New Layer & create the following selection with the help of ‘Pen Tool’

[12]-Now fill the selection with ‘c7c7c7′ color & create the following selection with the help of ‘Pen Tool’

[13]-Now fill the selection with ‘e8e8e8′ color & then set the 2 pxl Brush Tool, create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[14]-In Stroke Path select ‘Brush’ & then ok & after that create the following selection with the help of ‘Pen Tool’

[15]-Now fill the selection with ‘b2b2b2′ color & create the following selection with the help of ‘Pen Tool’

[16]-Now fill the selection with ‘fffffa’ color & then Open New Layer & then create the following selection with the help of ‘Pen Tool’ & fill with ‘0177ff’ color

[17]-Now create the following selection with the help of ‘Pen Tool’

[18]-Now fill the selection with ‘a6d0ff’ color & create the other selection & fill with different color

[19]-Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learnt some Photoshop Techniques & the Final Image should look like as shown below

http://tutorialqueen.com/photoshop-tutorials/photoshop-vip-suit-case

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Doctor Box Logo Stock Photo

Hi guys! Today I am telling you about How to Create Photoshop Doctor Box Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok

[4]-Now fill the selection with ‘e73d26′ color & then create the following selection with the help of ‘Pen Tool’

[5]-Now select ‘Burn Tool’ & create the following shading with inverse selection Ctrl+Shift+I

[6]-Now select ‘Dodge Tool’ & then highlight the following parts

[7]-Now create the following shading with the help of ‘Burn Tool’

[8]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[9]-Now fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’

[10]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[11]-Now fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’ & after that create the following selection with the help of ‘Pen Tool’

[12]-Now Open New Layer & then fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’

[13]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[14]-Now fill the selection with ‘fffffa’ color & then go to Filter>Blur>Gaussian Blur & use the following settings
Photoshop Technique-How to use the Gaussian Blur features

[15]-Now Open New Layer & then create the following selection with the help of ‘Ellipse Tool’

[16]-Now fill the selection with ‘cccdd1′ color & create the following selection with the help of ‘Ellipse Tool’ & create the some shading with the help of ‘Burn & Dodge Tool’ with inverse selection
Ctrl+Shift+I

[17]-Now go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[18]-Now select Inner Glow & use the following settings
Photoshop Technique-How to use the Inner Glow features

[19]-Now set the 2 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Ellipse Tool’ right click select ‘Stroke Path’

[20]-In Stroke Path select ‘Brush’ & then ok & after that create the some shading with the help of ‘Burn & Dodge Tool’

[21]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[22]-Now fill the selection with ‘f7a517′ color & create the some shading with the help of ‘Burn & Dodge Tool’ & after that create the following selection with the help of ‘Elliptical Marquee Tool’

[23]-Now Open New Layer & then fill the selection with same color & create the some shading with the help of ‘Burn & Dodge Tool’

[24]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[25]-In Stroke Path select ‘Brush’ & then ok & create the some shading with the help of ‘Burn & Dodge Tool’ & after that create the following selection with the help of ‘Pen Tool’

[26]-Now Open New Layer & then fill the selection with ‘dd2c19′ color & create the some shading with the help of ‘Burn Tool’ & after that Open New Layer [this layer should below all layers] & then create
the following selection with the help of ‘Pen Tool’

[27]-Now fill the selection with same color & create the some shading wih the help of ‘Burn & Dodge Tool’
Thanks for read this Photoshop Tutorial.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

http://tutorialqueen.com/photoshop-tutorials/photoshop-animated-melt-text

Posted by admino in Photoshop Tutorials No Comments →

Photoshop Female Gender Logo Stock Photo

Hi Friends! Today I am telling you about How to Create Photoshop Female Gender Logo Stock Photo

[1]-First of all Open New Document of Custom Size,Height & Width 400×450 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[3]-Now fill the selection with ‘cececd’ color & then create the following selection with the help of ‘Elliptical Marquee Tool’ & then press DELETE

[4]-Now select ‘Dodge Tool’ & Highlight the some parts like as shown below

[5]-Now select ‘Burn Tool’ & create the some shading

[6]-Now go to Blending Options, select Color Overlay & use the following settings
Photoshop Technique-How to use the Color Overlay features

[7]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[8]-Now fill the selection with same color & then create the some shading with the help of ‘Burn Tool’

[9]-Now go to Blending Options,select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[10]-Now select Color Overlay & use the following settings
Photoshop Technique-How to use the Color Overlay features

[11]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[12]-Now fill the selection with same color & create the following selection with the help of ‘Pen Tool’ & create the some shading with the help of ‘Burn & Dodge Tool’ with inverse selection Ctrl+Shift+I